BKRYY - 6300 V ELASTA-A-TRIM SG ENAMEL, 6300 V

  • MSDS: BKRYY
  • Manufacturer: EVR GARD COATINGS CO
  • Product Name: 6300 V ELASTA-A-TRIM SG ENAMEL, 6300 V
  • National Stock Number: 8010-00N016669
Product Identification

Product ID:6300 V ELASTA-A-TRIM SG ENAMEL, 6300 V
MSDS Date:01/01/1989
FSC:8010
NIIN:00N016669
MSDS Number: BKRYY

Responsible Party
EVR-GARD COATINGS CO
16400 GARFIELD AVE
PARAMOUNT, CA 90723
US

Emergency Phone: 213-531-0131

Info Phone: 213-541-0131

Cage: 5G582

Contractor
EVR-GARD COATINGS CO
PARAMOUNT, CA 90723 US

Telephone: 310-531-0131

Cage: 5G582

Ingredients

MINERAL SPIRITS. VP=5.0 MM/HG @ 68F.

Fraction By Weight: 12.30%

OSHA PEL 125 PPM (MFR)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:IRRIT OF NOSE, THROAT & EYES,
DIZZ, WEAK, FATG, NAUS, HDCH. SYMPS DISAPPEAR WHEN EXPOS CEASES.
UNCON IN EXTREME CASES. EYE IRRIT. SKIN:IRRIT. REDNESS & RASH.
INGEST:IRRIT OF RESP TRACT CHARACT B Y HDCH, DIZZ, STAG, CONFUSN &
UNCON & COMA IN EXTREME CASES. RPTS HAVE SHOWN THAT RPTD & PRLNG
OCCUP(SEE EFT OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: OVEREXPOSURE TO SOLVENTS CAN CAUSE
PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:PRLNG/RPTD CONTACT MAY CAUSE
DERMITITIS.

First Aid

First Aid:EYES:FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MIN. GET MD.
SKIN:WASH W/SOAPY WATER IMMED. APPLY LOTION/OIL TO AFFECTED AREA
AFTER THORO WASHING. REMOVE CONTAM CLTHING. GET MD. INGEST:DO NOT
INDUCE VOMI T. CALL MD IMMED. INHAL:REMOVE TO FRESHAIR. GET MD.

Fire Fighting

Lower Limits:1%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
FIGHT AS VOLAT LIQ FIRE. CLSD CNTNRS MAY EXPLODE WHEN EXPOS TO
EXTREME HEAT. KEEP AWAY FROM AREAS EXPOS TO FIRE.
Unusual Fire/Explosion Hazard:AVOID APPLICATN IN AREA OF PILOT LIGHTS,
SPARKS/OTHER IGNIT SOURCES AS VAPORS MAY ACCUM ON FLOOR & IGNITE.
KEEP CNTNRS CLSD TIGHTLY & STORE IN COOL PLACE.

Accidental Release

Spill Release Procedures:ABSORB SPILLED MATERIAL W/ABSORBENTS, SUCH AS
SAWDUST, CLAY, ETC., & FLUSH SPILL AREA W/LOTS OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE NEAR OPEN FLAME OR
SOURCES OF IGNIT. DO NOT STORE IN HIGH TEMP STORAGE. IN CASE OF
FIRE, REMOVE CLSD CNTNRS FROM AREAS EXPOSED TO FIRE.
Other Precautions:EMPTY CNTNRS USUALLY STILL HOLD RESIDUES OF MATERIAL
& VAPORS. THESE MUST BE CONSIDERED HAZARDOUS & DISPOSED OF IN
ACCORDANCE W/PROPER HANDLING PROCEDURES PRESCRIBED FOR HAZARDOUS
CHEMICALS.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN WHEN USING SOLV BASED COATINGS.
Ventilation:PROVIDE ADEQ VENT IN ALL WORKING AREAS AT ALL TIMES.
SERIOUS HEALTH PROBLEMS COULD RESULT FROM RPTD & PRLNG EXPOSURES.
Protective Gloves:NEOPRENE, BUNA N.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:STANDARD HYGIENIC PRACTICES MUST BE OBSERVED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Vapor Pres:SEE ING 1
Vapor Density:>AIR
Spec Gravity:1.4
Evaporation Rate & Reference:SLOWER THAN ETHER.
Solubility in Water:NOT SOLUBLE.
Appearance and Odor:WHITE PAINT & COLORS - PAINT THINNER ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS/ALKALIS. LONG TERM CONTACT W/WATER.
Stability Condition to Avoid:AVOID OPEN FLAMES, WELDING ARCS OR OTHER
HIGH TEMP SOURCES WHICH INDUCE THERMAL DECOMPOSITION & FIRE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CO*2
AND/OR CO.

Disposal

Waste Disposal Methods:DISPOSE OF ALL WASTES, INCLUDING ABSORBENTS USED
TO CLEAN UP SPILLS INTO 55-GAL METAL CNTNRS & DISPOSE IN APPROVED
DUMPSITE IN ACCORDANCE W/PRESCRIBED FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.